H3C S3100 Series Command Manual page 840

Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
Description
Use the cdup command to exit the current working directory and enter the parent
directory. The parent directory must be a directory that a user is authorized to access;
otherwise, the command cannot be executed.
Related commands: cd, pwd.
Examples
# Change the working directory to flash:/temp.
[ftp] cd flash:/temp
# Change the working directory to the parent directory.
[ftp] cdup
# Display the current directory.
[ftp] pwd
257 "flash:" is current directory.
1.2.6 close
Syntax
close
View
FTP client view
Parameters
None
Description
Use the close command to terminate an FTP connection without quitting FTP client
view.
This command has the same effect as that of the disconnect command.
Examples
# Terminate the FTP connection without quitting FTP client view.
[ftp] close
221 Server closing.
[ftp]
Chapter 1 FTP and SFTP Configuration
1-9
Commands