Reset Logbuffer; Reset Trapbuffer - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Information Center
H3C S3100 Series Ethernet Switches
Example
# Enable the system to output trap information to the trap buffer, whose size is set to 30.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center trapbuffer size 30

1.1.20 reset logbuffer

Syntax
reset logbuffer [ unit unit-id ]
View
User view
Parameter
unit-id: Unit ID of the device, the value can only be 1.
Description
Use the reset logbuffer command to clear information recorded in the log buffer.
Example
# Clear information recorded in the log buffer.
<Sysname> reset logbuffer

1.1.21 reset trapbuffer

Syntax
reset trapbuffer [ unit unit-id ]
View
User view
Parameter
unit-id: Unit ID of the device, the value can only be 1.
Description
Use the reset trapbuffer command to clear information recorded in the trap buffer.
Example
# Clear information recorded in the trap buffer.
Chapter 1 Information Center Configuration
1-21
Commands