H3C S3100 Series Command Manual page 176

Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches
giants
- throttles
CRC
frame
- overruns
aborts
ignored
- parity errors
Output(total): 0 packets, 0 bytes
Field
0 broadcasts, 0
multicasts, 0 pauses
1-11
Chapter 1 Port Basic Configuration
Description
The number of incoming giant frames
(A giant frame is of more than 1518
bytes if untagged or more than 1522
bytes if tagged.)
The number of throttles that occurred on
the port
(A throttle occurs when a port is shut
down due to buffer or memory overload.)
The number of CRC error frames
received in correct length
The number of incoming CRC error
frames with non-integer number of bytes
The number of packets dropped
because the receiving rate of the port
exceeds the processing capability of the
input queues
The total number of incoming illegal
packets, including:
Fragments: CRC error frames of less
than 64 bytes
non-integer).
Jabber frames: CRC error frames of
more than 1518 bytes if untagged or
1522 bytes if tagged (integer or
non-integer).
Symbol error frames: frames with at
least one symbol error.
Unknown operator frames: MAC
control frames that are not Pause
frames
Length error frames: frames whose
actual length (46-1500 bytes) is
inconsistent with the length field in the
802.3 header.
The number of packets dropped due to
insufficient receive buffer on the port
The number of incoming parity error
frames
Count in packets and in bytes of total
outgoing traffic on the port, including
normal packets, abnormal packets, and
normal Pause frames
The number of outgoing broadcast
packets, the number of outgoing
multicast packets, and the number of
outgoing Pause frames on the port
Commands
(integer or