Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
2.1.6 display rmon statistics
Syntax
display rmon statistics [ interface-type interface-number | unit unit-number ]
View
Any view
Parameters
interface-type: Interface type.
interface-number: Interface number.
unit unit-number: Specifies a unit number.
Description
Use the display rmon statistics command to display the RMON statistics on a
specified port or a specified unit. If you do not specify the port or the unit, this command
displays the RMON statistics on all the ports or units.
The information displayed includes the number of:
Collisions
Packets with CRC errors
Undersize/Oversize packets
Broadcast/multicast packets
Received bytes
Received packets
Related commands: rmon statistics.
Examples
# Display the RMON statistics on Ethernet 1/0/1 port.
<Sysname> display rmon statistics Ethernet 1/0/1
Statistics entry 1 owned by user1-rmon is VALID.
Interface : Ethernet1/0/1<ifIndex.4227625>
etherStatsOctets
etherStatsBroadcastPkts
etherStatsUndersizePkts
etherStatsFragments
etherStatsCRCAlignErrors : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64
256-511: 0
: 30561
: 102
: 0
: 0
: 177
,
65-127
,
512-1023: 0
Chapter 2 RMON Configuration Commands
, etherStatsPkts
, etherStatsMulticastPkts : 25
, etherStatsOversizePkts
, etherStatsJabbers
, etherStatsCollisions
: 27
,
128-255
,
1024-1518: 11
2-8
: 217
: 0
: 0
: 0
: 2