H3C S3100 Series Command Manual page 554

Command Manual (For Soliton) – ACL
H3C S3100 Series Ethernet Switches
Arguments/Keyw
ords
destination
{ dest-addr
dest-wildcard |
any }
precedence
precedence
tos tos
dscp dscp
fragment
ttl
time-range
time-name
Note:
The sour-wildcard/dest-wildcard argument is the complement of the wildcard mask of
the source/destination subnet mask. For example, you need to input 0.0.255.255 to
specify the subnet mask 255.255.0.0.
If you specify the dscp keyword, you can directly input a value ranging from 0 to 63 or
input one of the keywords listed in
Type Function
Specifies the
destination
Destinatio
address
n address
information for
the ACL rule
Specifies an
Packet
IP
priority
precedence.
Specifies a
Packet
ToS
priority
preference.
Packet Specifies a
priority DSCP priority.
Indicates that
the rule
Fragment
applies only to
information
non-tail
fragments.
Specifies the
TTL
TTL for the
information
ACL rule.
Specifies the
Time
time range in
range
which the rule
information
takes effect.
Table 1-8
1-15
Chapter 1 ACL Configuration Commands
Description
The dest-addr dest-wildcard
arguments specify the
destination address of the
packets, expressed in dotted
decimal notation. You can
specify the IP address of a host
as the destination address by
providing 0 for the
dest-wildcard argument.
The any keyword specifies any
destination address.
The precedence argument can
be a number in the range 0 to
7.
The tos argument can be a
number in the range 0 to 15.
The dscp argument can be a
number in the range 0 to 63.
—
The ttl argument can be a
number in the range 0 to 255.
time-name: specifies the name
of the time range in which the
rule is active; a string
comprising 1 to 32 characters.
as DSCP.