Ftp Client Configuration Commands - H3C S3100 Series Command Manual

Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
can set an idle timeout time so that the FTP server considers an FTP connection invalid
and terminates it if no data exchange occurs on it in idle timeout time.
Examples
# Set the idle timeout time to 36 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ftp timeout 36

1.2 FTP Client Configuration Commands

Note:
In the examples of this section, if a command should be executed in FTP client view,
the configuration process for entering FTP client view will be omitted to avoid
repetition. For the configuration of the command for entering FTP client view, refer
to ftp.
When executing the FTP client configuration commands in this section, confirm
whether the corresponding access rights are configured on the FTP server, for
example, query file lists under a working directory, read/download the specified files,
create a directory/upload a file, and rename/delete a file on the server. For the
configuration of user access rights, refer to the FTP server software description.
1.2.1 ascii
Syntax
ascii
View
FTP client view
Parameters
None
Description
Use the ascii command to specify that files be transferred in ASCII mode, which is
used for transferring text files.
By default, files are transferred in ASCII mode.
Related commands: binary.
Chapter 1 FTP and SFTP Configuration
1-6
Commands