H3C S3100 Series Command Manual page 874

Command Manual (For Soliton) – Information Center
H3C S3100 Series Ethernet Switches
Parameter
unit-id: Unit ID of the device, the value can only be 1.
Description
Use the display info-center command to display the operation status of information
center, the configuration of information channels, the format of time stamp.
Related command: info-center enable, info-center loghost, info-center logbuffer,
info-center console channel, info-center monitor channel, info-center trapbuffer,
info-center snmp channel, info-center timestamp
Example
# Display the operation status of information center, the configuration of information
channels, the format of time stamp of the current system.
<Sysname> display info-center
Information Center: enabled
Log host:
Console:
Monitor:
SNMP Agent:
Log buffer:
Trap buffer:
Information timestamp setting:
the interface name of the source address : Vlan-interface1
192.168.0.2, channel number : 2, channel name : loghost
language : english, host facility local : 7
channel number : 0, channel name : console
channel number : 1, channel name : monitor
channel number : 5, channel name : snmpagent
enabled,max buffer size : 1024, current buffer size : 512,
current messages : 512, channel number : 4, channel name : logbuffer
dropped messages : 0, overwritten messages : 586
enabled,max buffer size : 1024, current buffer size : 256,
current messages : 5, channel number : 3, channel name : trapbuffer
dropped messages : 0, overwritten messages : 0
log - date, trap - date, debug - boot
Chapter 1 Information Center Configuration
1-2
Commands