Display Ip Interface Brief - H3C S6550X-HI Series Command Reference Manual

Field
ICMP packet input number:
Echo reply:
Unreachable:
Source quench:
Routing redirect:
Echo request:
Router advert:
Router solicit:
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
Unknown type:
Related commands

display ip interface brief

ip address
statistics l3-packet enable
display ip interface brief
Use display ip interface brief
Syntax
display ip interface [ interface-type [ interface-number ] ] brief
[ description ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type
command displays brief IP configuration for all Layer 3 interfaces except VA interfaces.
interface-number
command displays brief IP configuration for all Layer 3 interfaces of the specified type.
description
command displays a maximum of 16 characters for each interface description. If the description is
longer than 16 characters, the first 14 characters are displayed, followed by an ellipsis (...).
Description
Total number of ICMP packets received on the interface (statistics start at
the device startup):
•
Echo reply packets.
•
Unreachable packets.
•
Source quench packets.
•
Routing redirect packets.
•
Echo request packets.
•
Router advertisement packets.
•
Router solicitation packets.
•
Time exceeded packets.
•
IP header bad packets.
•
Timestamp request packets.
•
Timestamp reply packets.
•
Information request packets.
•
Information reply packets.
•
Netmask request packets.
•
Netmask reply packets.
•
Unknown type packets.
: Specifies an interface type. If you do not specify an interface type, this
: Specifies an interface number. If you do not specify an interface number, this
: Displays complete interface descriptions. If you do not specify this keyword, the
to display brief IP configuration for Layer 3 interfaces.
3