X Configuration Commands; Display Dot1X; Chapter 1 802.1X Configuration Commands - H3C S3100 Series Command Manual

Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches

Chapter 1 802.1x Configuration Commands

1.1 802.1x Configuration Commands

1.1.1 display dot1x

Syntax
display dot1x [ sessions | statistics ] [ interface interface-list ]
View
Any view
Parameter
sessions: Displays the information about 802.1x sessions.
statistics: Displays the statistics on 802.1x.
interface: Display the 802.1x-related information about a specified port.
interface-list: Ethernet port list, in the form of interface-list= { interface-type
interface-number [ to interface-type interface-number ] } &<1-10>, in which
interface-type specifies the type of an Ethernet port and interface-number is the
number of the port. The string "&<1-10>" means that up to 10 port lists can be provided.
Description
Use the display dot1x command to display 802.1x-related information, such as
configuration information, operation information (session information), and statistics.
When the interface-list argument is not provided, this command displays
802.1x-related information about all the ports. The output information can be used to
verify 802.1 x-related configurations and to troubleshoot.
Related command: reset dot1x statistics, dot1x, dot1x retry, dot1x max-user,
dot1x port-control, dot1x port-method, and dot1x timer.
Example
# Display 802.1x-related information.
<Sysname> display dot1x
Global 802.1X protocol is enabled
CHAP authentication is enabled
DHCP-launch is disabled
Handshake is enabled
Proxy trap checker is disabled
Chapter 1 802.1x Configuration Commands
1-1