Ip Http Shutdown - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Login
H3C S3100 Series Ethernet Switches

1.1.12 ip http shutdown

Syntax
ip http shutdown
undo ip http shutdown
View
System view
Parameters
None
Description
Use the ip http shutdown command to shut down the WEB Server.
Use the undo ip http shutdown command to launch the WEB Server.
By default, the WEB Server is launched.
Note:
To improve security and prevent attacks to the unused Sockets, TCP 80 port for HTTP
service will be enabled or disabled after corresponding configurations.
TCP 80 port is enabled only after you use the undo ip http shutdown command to
enable the Web server.
If you use the ip http shutdown command to disabled the Web server, TCP 80 port
is disabled.
Caution:
After the Web file is upgraded, you need to use the boot web-package command to
specify a new Web file or specify a new Web file from the boot menu after reboot for the
Web server to operate properly. Refer to the File System Management part in this
manual for information about the boot web-package command.
Examples
# Shut down the WEB Server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
1-15
Chapter 1 Login Commands