H3C S3100 Series Command Manual page 476

Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
View
HWTACACS scheme view
Parameters
retry-times: Maximum number of transmission attempts of a stop-accounting request,
ranging from 1 to 300.
Description
Use the retry stop-accounting command to enable the stop-accounting request
retransmission function and set the maximum number of attempts to transmit a
stop-accounting request.
Use the undo retry stop-accounting command to restore the default setting.
By default, this function is enabled and the maximum number of transmission attempts
is 100.
Related commands: reset stop-accounting-buffer, hwtacacs scheme, display
stop-accounting-buffer.
Examples
# Enable the stop-accounting request retransmission function and set the maximum
number of transmission attempts of a request to 50.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] retry stop-accounting 50
1.3.14 secondary accounting
Syntax
secondary accounting ip-address [ port ]
undo secondary accounting
View
HWTACACS scheme view
Parameters
ip-address: IP address of the secondary accounting server to be used, a valid unicast
address in dotted decimal notation.
port: Port number of the secondary accounting server, ranging from 1 to 65535.
Chapter 1 AAA Configuration Commands
1-76