Reset Traffic-Limit; Reset Traffic-Limit Vlan - H3C S3100 Series Command Manual

Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches

1.1.26 reset traffic-limit

Syntax
reset traffic-limit inbound acl-rule
View
System view, Ethernet port view, Port group view
Parameter
inbound: Specifies to clear the statistics on the inbound packets.
acl-rule: ACL rules to be applied. This argument can be the combination of multiple
ACLs. For more information about this argument, refer to
Description
Use the reset traffic-limit command to clear the traffic policing statistics on all the
packets matching specific ACL rules, or packets that match specific ACL rules and are
of a port group or pass a port.
Related command: traffic-limit.
Example
# Clear the traffic policing statistics on packets matching ACL 2000 and passing
Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] reset traffic-limit inbound ip-group 2000

1.1.27 reset traffic-limit vlan

Syntax
reset traffic-limit vlan vlan-id inbound acl-rule
View
System view
Parameter
vlan-id: VLAN ID, in the range 1 to 4094.
inbound: Specifies to clear the statistics on the inbound packets.
acl-rule: ACL rules to be applied. This argument can be the combination of multiple
ACLs. For more information about this argument, refer to
1-29
Chapter 1 QoS Commands
Table 1-8 and Table 1-9.
Table 1-8 and Table 1-9.