H3C S3100 Series Command Manual page 863

Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
sftp-client> pwd
/
1.4.13 quit
Syntax
quit
View
SFTP client view
Parameters
None
Description
Use the quit command to terminate a connection with the remote SFTP server and
return to system view.
This command has the same effect as that of the commands bye and exit.
Examples
# Terminate a connection with the remote SFTP server.
sftp-client> quit
Bye
[Sysname]
1.4.14 remove
Syntax
remove remote-file&<1-10>
View
SFTP client view
Parameters
remote-file&<1-10>: Name of a file on the server. &<1-10> indicates that up to ten file
names can be input. These file names should be separated by spaces.
Description
Use the remove command to delete a specified file from the remote SFTP server.
This command has the same effect as that of the delete command.
Chapter 1 FTP and SFTP Configuration
1-32
Commands