Password - H3C S3100 Series Command Manual

Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
Parameters
number: Number of packets to be transmitted in one probe for a jitter test, in the range
of 10 to 100.
Description
Use the jitter-packetnum command to configure the number of packets to be sent in
one probe for a jitter test.
Use the undo jitter-packetnum command to restore the default.
By default, 10 packets are sent in a probe for a jitter test.
Related commands: jitter-interval.
Note:
This command applies to jitter tests only.
Examples
# Configure to send 30 packets in a probe for a jitter test.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator jitter
[Sysname-hwping-administrator-jitter] test-type jitter
[Sysname-hwping-administrator-jitter] jitter-packetnum 30

1.1.18 password

Syntax
password password
undo password
View
HWPing test group view
Parameters
password: Password for logging in to an FTP server, a string of 1 to 32 characters.
Description
Use the password command to configure a password for logging in to the FTP server.
Use the undo password command to remove the configured password.
1-21
Chapter 1 HWPing Commands