Display Link-Aggregation Verbose - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Link Aggregation
H3C S3100 Series Ethernet Switches
<Sysname> display link-aggregation summary
Aggregation Group Type:D -- Dynamic, S -- Static , M -- Manual
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor ID: 0x8000, 000f-e20f-5104
AL AL
ID Type
--------------------------------------------------------------------------
1 S
2 M
Table 1-2 Description on the fields of the display link-aggregation summary
command
Aggregation Group
Type
Loadsharing Type
Actor ID
AL ID
AL Type
Partner ID
Select Ports
Unselect Ports
Share Type
Master Port

1.1.3 display link-aggregation verbose

Syntax
display link-aggregation verbose [ agg-id ]
Partner ID
0x8000,0000-0000-0000 0
none
Field
Aggregation group type: D for dynamic, S for static, and M
for manual
Load sharing type: Shar for load sharing and NonS for
non-load sharing
Local device ID
Aggregation group ID
Aggregation group type: D (dynamic), S (static), or M
(manual)
ID of the remote device, including the system priority and
system MAC address of the remote device
For a device belonging to an dynamic aggregation group
or static aggregation group, if no LACP packet is received,
the partner ID is displayed as 0x8000, 0000-0000-0000.
Number of the selected ports
Number of the unselected ports
Load sharing type: Shar (load-sharing), or NonS
(non-load-sharing)
the smallest port number in an aggregation group
Chapter 1 Link Aggregation Configuration
Select Unselect Share Master
Ports Ports
1
0 1
Description
1-3
Commands
Type Port
NonS Ethernet1/0/2
NonS Ethernet1/0/3