H3C S3100 Series Command Manual page 771

Command Manual ( For Soliton ) – SSH
H3C S3100 Series Ethernet Switches
Description
Use the display public-key peer command to display information about locally saved
public keys of SSH peers. If no key name is specified, the command displays detailed
information about the locally saved public keys of all SSH peers.
Caution:
Sometimes the public key modulo displayed with the display public-key peer
command is one bit smaller than the actual modulo. This is because the actually
generated key pair is one bit smaller than specified. For example, when you specify a
1024-bit key pair, the actually generated key pair may have 1024 or 1023 bits.
Note:
You can configure an SSH peer's public key on the current switch by using the
public-key peer command or the public-key peer import sshkey command.
Related commands: public-key peer, public-key peer import sshkey.
Examples
# Display brief information about all peer public keys.
<Sysname> display public-key peer brief
Type Module
---------------------------
RSA 1023
DSA 1024
RSA 1024
# Display the information about the public key named pubkey-name.
<Sysname> display public-key peer name pubkey-name
=====================================
Key name
Key type
Key module: 1024
=====================================
Key Code:
30819D300D06092A864886F70D010101050003818B00308187028181009C46A8710216CEC0
C01C7CE136BA76C79AA6040E79F9E305E453998C7ADE8276069410803D5974F708496947AB
39B3F39C5CE56C95B6AB7442D56393BF241F99A639DD02D9E29B1F5C1FD05CC1C44FBD6CFF
Name
idrsa
127.0.0.1
18
: pubkey-name
: RSA
1-3
Chapter 1 SSH Commands