Dns-Server - H3C S3100 Series Command Manual

Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
DNS Resolve Timeout Times
DNS Resolve Failed Times
Note:
The description on a specific field is available for the test results of all types of tests, so
that not the description on the output information of all types of tests is provided here.

1.1.6 dns-server

Syntax
dns-server ip-address
undo dns-server
View
HWPing test group view
Parameters
ip-address: IP address to be assigned to a domain name server (DNS).
Description
Use the dns-server command to configure the IP address of a DNS server.
Use the undo dns-server command to remove the IP address of a DNS server.
By default, no DNS server IP address is configured.
Note:
This command applies to DNS and HTTP tests only.
For an HTTP test, if configuring the destination address as the host name, you must
configure the IP address of the DNS server to resolve the host name into an IP
address, which is the destination IP address of this HTTP test
Examples
# Set 192.168.1.1 as the IP address of the DNS server.
<Sysname> system-view
Field
1-12
Chapter 1 HWPing Commands
Description
DNS resolution timeout times
Number of failed DNS resolutions