Ftp Server Configuration Commands - H3C S3100 Series Command Manual

Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
Chapter 1 FTP and SFTP Configuration

1.1 FTP Server Configuration Commands

1.1.1 display ftp-server
Syntax
display ftp-server
View
Any view
Parameters
None
Description
Use the display ftp-server command to display the FTP server-related settings of a
switch when it operates as an FTP server, including startup status, number of users,
and so on.
You can use this command to verify FTP server-related configurations.
Related commands: ftp server enable, ftp timeout.
Examples
# Display the FTP server-related settings of the switch (assuming that the switch is
operating as an FTP server).
<Sysname> display ftp-server
FTP server is running
Max user number
User count
Timeout value(in minute)
Commands
1
0
30
1-1
Chapter 1 FTP and SFTP Configuration
Commands