H3C S3100 Series Command Manual page 649

Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
View
Any view
Parameters
None
Description
Use the display ntdp command to display the global NTDP information.
The displayed information includes topology collection range (hop count), topology
collection interval (NTDP timer), device/port forwarding delay of topology collection
requests, and time used by the last topology collection.
Examples
# Display the global NTDP information.
<Sysname> display ntdp
NTDP is running.
Hops
Timer
Hop Delay : 100 ms
Port Delay: 10 ms
Last collection total time: 92ms
Table 2-2 Description on the fields of the display ntdp command
NTDP is running.
Hops
Timer
Hop Delay
Port Delay
Last collection total time
: 4
: 0 min(disable)
Field
NTDP is enabled globally on this device.
Hop count for topology collection, which is configured
through the ntdp hop command
Interval to collect topology information, which is
configured through the ntdp timer command
"disable" means this switch is not a management device
and does not perform periodic topology collection.
Delay for other devices to forward topology collection
requests, which is configured through the ntdp timer
hop-delay command
Delay for ports on other devices to forward topology
collection requests, which is configured through the
ntdp timer port-delay command
Time used by the last topology collection
Chapter 2 HGMP V2 Configuration
Description
2-7
Commands