Local-Server Nas-Ip - H3C S3100 Series Command Manual

Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
1.2.10 local-server
Syntax
local-server enable
undo local-server
View
System view
Parameters
None
Description
Use the local-server enable command to enable the UDP ports for local RADIUS
services.
Use the undo local-server command to disable the UDP ports for local RADIUS
services.
By default, the UDP ports for local RADIUS services are enabled.
In addition to functioning as a RADIUS client to provide remote RADIUS authentication,
authorization, and accounting services, the switch can act as a local RADIUS server to
provide simple RADIUS server functions locally. For the switch to act as a local server,
you need to use this command to enable the service ports. The UDP port for local
RADIUS authentication/authorization service is 1645, and that for local RADIUS
accounting service is 1646.
Related commands: radius scheme, state, local-server nas-ip.
Examples
# Enable UDP ports for local RADIUS services.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] local-server enable

1.2.11 local-server nas-ip

Syntax
local-server nas-ip ip-address key password
undo local-server nas-ip ip-address
View
System view
Chapter 1 AAA Configuration Commands
1-43