Display Igmp-Snooping Group - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Multicast
H3C S3100 Series Ethernet Switches
Examples
# Display IGMP Snooping configuration information on the switch.
<Sysname> display igmp-snooping configuration
Enable IGMP Snooping.
The router port timeout is 105 second(s).
The max response timeout is 10 second(s).
The host port timeout is 260 second(s).
The above-mentioned information shows: IGMP Snooping is enabled, the aging time of
the router port is 105 seconds, the maximum response time in IGMP queries is 10
seconds, and the aging time of multicast member ports is 260 seconds.

1.1.2 display igmp-snooping group

Syntax
display igmp-snooping group [ vlan vlan-id ]
View
Any view
Parameters
vlan vlan-id: Specifies the VLAN in which the multicast group information is to be
displayed, where vlan-id ranges from 1 to 4094.. If you do not specify a VLAN, this
command displays the multicast group information of all VLANs.
Description
Use the display igmp-snooping group command to display the IGMP Snooping
multicast group information.
Related commands: igmp-snooping, igmp host-join, multicast static-group
interface, multicast static-group vlan, multicast static-router-port, multicast
static-router-port vlan
Examples
# Display the information about the multicast groups in VLAN 100.
<Sysname> display igmp-snooping group vlan 100
Total 1 IP Group(s).
Total 1 MAC Group(s).
Vlan(id):100.
Total 1 IP Group(s).
Total 1 MAC Group(s).
Static Router port(s):
Chapter 1 IGMP Snooping Configuration
1-2
Commands