H3C S3100 Series Command Manual page 110

Command Manual ( For Soliton ) – Management VLAN
H3C S3100 Series Ethernet Switches
**Destination: 127.0.0.1
The statistics of the routing table are displayed first, and then the detailed descriptions
of each route.
statistics information about the routing table.
Table 1-8 Description on the fields of the display ip routing-table verbose command
Holddown
Delete
Hidden
1.1.13 interface Vlan-interface
Syntax
interface Vlan-interface vlan-id
undo interface Vlan-interface vlan-id
View
System view
Parameter
vlan-id: ID of the management VLAN, in the range of 1 to 4094.
Description
Use the interface Vlan-interface command to create a management VLAN interface
and enter management VLAN interface view.
Use the undo interface Vlan-interface command to remove the management VLAN
interface.
Before creating a management VLAN interface, make sure the VLAN identified by the
vlan-id argument is created and is configured as the management VLAN.
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Unicast>
Age: 57:12 Cost: 0/0
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NotInstall NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 57:12 Cost: 0/0
Table 1-5 describes the route states and
Field
Chapter 1 Management VLAN Configuration
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Description
Number of the routes that are held down
Number of the deleted routes
Number of the hidden routes
1-16
Commands
Table 1-8 describes the