Ipv6 Address Auto Link-Local - H3C S3100 Series Command Manual

Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ipv6 address 2001::1/64
Method II:
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ipv6 address 2001::1 64

1.1.15 ipv6 address auto link-local

Syntax
ipv6 address auto link-local
undo ipv6 address auto link-local
View
VLAN interface view
Parameters
None
Description
Use the ipv6 address auto link-local command to automatically generate a link-local
address for an interface.
Use the undo ipv6 address auto link-local command to remove the automatically
generated link-local address for an interface.
By default, a link-local address is generated automatically after a site-local IPv6
address or global unicast address is configured for an interface.
Note that:
After an IPv6 site-local address or aggregatable global unicast address is
configured for an interface, a link-local address is generated automatically. The
automatically generated link-local address is the same as the one generated by
using the ipv6 address auto link-local command.
The undo ipv6 address auto link-local command can be used only after the
ipv6 address auto link-local command is executed. However, if an IPv6
site-local address or aggregatable global unicast address is already configured for
an interface, the interface still has a link-local address because the system
automatically generates one for the interface. If no IPv6 site-local address or
aggregatable global unicast address is configured, the interface has no link-local
address.
Chapter 1 IPv6 Configuration Commands
1-23