Set Authentication Password - H3C IE4300 Command Reference Manual

: Specifies the USB line.
usb
: Specifies the VTY line.
vty
: Specifies the relative number of a user line. The value range is 0 to 9 for AUX and USB
number2
lines and 0 to 63 for VTY lines.
Usage guidelines
You can use this command to send notifications to online users before performing an operation that
might affect other online users, for example, before rebooting the device.
To end a message, press Enter. To abort the send operation, press Ctrl+C.
Examples
# Send a notification to the user on VTY 1.
<Sysname> send vty 1
Input message, end with Enter; abort with CTRL+C:
Your attention, please. I will reboot the system in 3 minutes.
Send message? [Y/N]:y
The message should appear on the user's terminal screen as follows:
[Sysname]
***
***
***Message from vty0 to vty1
***
Your attention, please. I will reboot the system in 3 minutes.

set authentication password

Use
set authentication password
Use
undo set authentication password
Syntax
set authentication password { hash | simple } string
undo set authentication password
Default
No password is set for local password authentication.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
: Specifies a password in hashed form.
hash
: Sets a password in plaintext form. For security purposes, the password specified in
simple
plaintext form will be stored in hashed form.
to set the password for local password authentication.
to restore the default.
39