Console Port Login Configuration With Authentication Mode Being Password; Configuration Procedure - H3C S3100-52P Operation Manual

Operation Manual – Login
H3C S3100-52P Ethernet Switch
[H3C] user-interface aux 0
# Specify not to authenticate users logging in through the Console port.
[H3C-ui-aux0] authentication-mode none
# Specify commands of level 2 are available to users logging into the AUX user
interface.
[H3C-ui-aux0] user privilege level 2
# Set the baud rate of the Console port to 19,200 bps.
[H3C-ui-aux0] speed 19200
# Set the maximum number of lines the screen can contain to 30.
[H3C-ui-aux0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[H3C-ui-aux0] history-command max-size 20
# Set the timeout time of the AUX user interface to 6 minutes.
[H3C-ui-aux0] idle-timeout 6
2.5 Console Port Login Configuration with Authentication
Mode Being Password

2.5.1 Configuration Procedure

Table 2-6 Console port login configuration with the authentication mode being
password
Operation
Enter system view
Enter
interface view
Configure
authenticate
using
password
Set the local password
Command
system-view
AUX user user-interface aux
0
to
users authentication-mo
the local de password
set authentication
password { cipher |
simple } password
Chapter 2 Logging in through the Console Port
—
—
Required
By default, users logging into a
switch through the Console port
are not authenticated; while those
logging in through Modems or
Telnet are authenticated.
Required
2-9
Description