Set Authentication Password - H3C S6550X-HI Series Command Reference Manual

Syntax
send { all | number1 | { aux | vty } number2 }
Views
User view
Predefined user roles
network-admin
Parameters
: Specifies all user lines.
all
: Specifies the absolute number of a user line. The value range is 0 to 64.
number1
: Specifies the AUX line.
aux
: Specifies the VTY line.
vty
: Specifies the relative number of a user line. The value is fixed at 0 for AUX lines and the
number2
value range is 0 to 63 for VTY lines.
Usage guidelines
You can use this command to send notifications to online users before performing an operation that
might affect other online users, for example, before rebooting the device.
To end a message, press Enter. To abort the send operation, press Ctrl+C.
Examples
# Send a notification to the user on VTY 1.
<Sysname> send vty 1
Input message, end with Enter; abort with CTRL+C:
Your attention, please. I will reboot the system in 3 minutes.
Send message? [Y/N]:y
The message should appear on the user's terminal screen as follows:
[Sysname]
***
***
***Message from vty0 to vty1
***
Your attention, please. I will reboot the system in 3 minutes.

set authentication password

Use
set authentication password
Use
undo set authentication password
Syntax
set authentication password { hash | simple } string
undo set authentication password
Default
No password is set for local password authentication.
to set the password for local password authentication.
to restore the default.
35