Display Stp Region-Configuration - H3C S6812 Series Command Reference Manual

Role change
Time
Port priority
Designated priority : 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.1
Port Ten-GigabitEthernet1/0/2
Role change
Time
Port priority
Designated priority : 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.2
# In PVST mode, display the port role calculation history on the specified slot in VLAN 2.
<Sysname> display stp vlan 2 history slot 1
--------------- STP slot 1 history trace ---------------
-------------------
Port Ten-GigabitEthernet1/0/1
Role change
Time
Port priority
Designated priority : 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.1
Port Ten-GigabitEthernet1/0/2
Role change
Time
Port priority
Designated priority : 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.2
Table 7 Command output
Field
Port
Role change
Time

display stp region-configuration

Use display stp region-configuration to display effective MST region configuration.
Syntax
display stp region-configuration
Views
Any view
Predefined user roles
network-admin
network-operator
: ROOT->DESI (Aged)
: 2009/02/08 00:22:56
: 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.1
: ALTER->ROOT
: 2009/02/08 00:22:56
: 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.2
128.153
128.153
VLAN 2 ---------------------
: ROOT->DESI (Aged)
: 2009/02/08 00:22:56
: 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.1
: ALTER->ROOT
: 2009/02/08 00:22:56
: 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.2
Description
Port name.
Role change of the port (Aged means that the change was caused by expiration
of the received configuration BPDU).
Time of port role calculation.
15