Display Stp Region-Configuration - H3C S3100-52P Command Manual
Mstp
Hide thumbs
Also See for S3100-52P:
- Operation manual (955 pages) ,
- Installation manual (54 pages) ,
- Command manual (42 pages)
Table of Contents
Advertisement
Command Manual – MSTP
H3C S3100-52P Ethernet Switches
STP State
Protection
1.1.5 display stp region-configuration
Syntax
display stp region-configuration
View
Any view
Parameter
None
Description
Use the display stp region-configuration command to display the activated MST
region configuration, including the region name, region revision level, and VLAN-to-STI
mappings configured for the switch.
Related command: stp region-configuration.
Example
# Display the configuration of the MST region.
<H3C> display stp region-configuration
Oper Configuration
Format selector :0
Region name
Revision level
Instance
0
1
2
Table 1-3 Description on the fields of the display stp region-configuration command
Format selector
Region name
Field
:hello
:0
Vlans Mapped
21 to 4094
1 to 10
11 to 20
Field
1-6
Chapter 1 MSTP Configuration Commands
Description
STP state on the port, which can be
forwarding and discarding.
Protection type of the port
Description
The selector specified by MSTP
The name of the MST region
Advertisement
Table of Contents
