Display Stp Region-Configuration - H3C IE4300 Command Reference Manual

Field

display stp region-configuration

Use
display stp region-configuration
Syntax
display stp region-configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# In MSTP mode, display effective MST region configuration.
<Sysname> display stp region-configuration
Oper Configuration
Format selector
Region name
Revision level
Configuration digest : 0x5f762d9a46311effb7a488a3267fca9f
Instance
0
1
2
Table 8 Command output
Field
Format selector
Region name
Revision level
VLANs Mapped
Related commands
instance
region-name
Description
regional root bridge ID, cost of the path to the regional root bridge, device
bridge ID, designated port ID, and current port ID, which are separated with
spaces.
•
For PVST mode and CSTs in MSTP mode, port priority includes regional
root bridge ID, cost of the path to the regional root bridge, device bridge ID,
designated port ID, and current port ID, which are separated with spaces.
: 0
: hello
: 0
VLANs Mapped
21 to 4094
1 to 10
11 to 20
Description
Format selector that is defined by the spanning tree protocol. The default
value is 0, and the selector cannot be configured.
MST region name.
Revision level of the MST region. The default value is 0, and the level can be
configured by using the
VLANs mapped to the MSTI.
to display effective MST region configuration.
revision-level
16
command.