Lcd Controller Interrupt Id Register (Liidr); Liicr Bit Definitions - Intel PXA255 Developer's Manual

Table 7-12. LCSR Bit Definitions (Sheet 2 of 2)
Physical Address
0x4400_0038
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
Reset X X X X X X X
Bits Name
2 BER
1 SOF
0
7.6.8

LCD Controller Interrupt ID Register (LIIDR)

LIIDR, shown in
currently being processed when a start of frame (SOF), end of frame (EOF), branch (BS), or bus
error (BER) interrupt is signalled. LIIDR is written to only when an unmasked interrupt of the
above type is signalled and there are no other unmasked interrupts in the LCD controller pending.
As such, the register is considered to be sticky and will be overwritten only when the signalled
interrupt is cleared by writing the LCD controller status register. Except for a bus error, in dual
panel mode LIIDR is written only when both channels have reached a given state. LIIDR is written
with the last channel to reach that state. (i.e. FIDR of the last channel to reach SOF would be
written in LIIDR if SOF interrupts are enabled).
This is a read/write register. Ignore reads from reserved bits. Write zeros to reserved bits.
Table 7-13. LIICR Bit Definitions
Physical Address
0x4400_003C
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
Reset ? ? ? ? ? ?
Bits Name
31:3 IFRAMEID
2:0
Intel® PXA255 Processor Developer's Manual
LCD Controller Status Register 1
reserved
X X X X X X X
Bus error status, nonmaskable interrupt:
0 = DMA has not attempted an access to reserved/nonexistent memory space.
1 = DMA has attempted an access to a reserved/nonexistent location in external memory.
Start Of Frame status, maskable interrupt:
0 = A new frame descriptor with its SOFINT bit set has not been fetched.
1 = The DMA has begun fetching a new frame with its SOFINT bit set.
LCD Disable Done status, maskable interrupt:
LDD
0 = LCD has not been disabled or the last active frame completed.
1 = LCD has been disabled and the last active frame has completed.
Table 7-13, contains a copy of the Frame ID Register (FIDR) from the descriptor
LCD Controller Interrupt ID
? ? ? ? ? ? ?
Interrupt Frame ID
— reserved
X X X X X X X
Description
Register
IFRAMEID
? ? ? ? ? ? ? ?
Description
LCD Controller
LCD Controller
8 7 6 5 4 3
0 0 0 0 0 0 0 0
LCD Controller
8 7 6 5 4 3
? ? ? ? ? ? ? ?
2 1 0
0 0 0
2 1 0
reserved
X X X
7-41