Udc Endpoint X Control/Status Register (Udccs3/8/13); Udccs3/8/13 Bit Definitions - Intel PXA255 Developer's Manual

Intel computer hardware user manual
Hide thumbs Also See for PXA255:
Table of Contents

Advertisement

12.6.5.7
Receive FIFO Not Empty (RNE)
The receive FIFO not empty bit indicates that unread data remains in the receive FIFO. This bit
must be polled when the UDCCSx[RPC] bit is set to determine if there is any data in the FIFO that
the DMA did not read. The receive FIFO must continue to be read until this bit clears or data will
be lost.
12.6.5.8
Receive Short Packet (RSP)
The UDC uses the receive short packet bit to indicate that the received OUT packet in the active
buffer currently being read is a short packet or zero-sized packet. This bit is updated by the UDC
after the last byte is read from the active buffer and reflects the status of the new active buffer. If
UDCCSx[RSP] is a one and UDCCSx[RNE] is a 0, it indicates a zero-length packet. If a zero-
length packet is present, the core must not read the data register. UDCCSx[RSP] is cleared when
the next OUT packet is received.
These are read/write registers. Ignore reads from reserved bits. Write zeros to reserved bits.
12.6.6

UDC Endpoint x Control/Status Register (UDCCS3/8/13)

USCCS3/8/13, shown in
Isochronous IN endpoint.
Table 12-17. UDCCS3/8/13 Bit Definitions
0x4060_001C
0x4060_0030
0x4060_0044
Bit
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
Reset X X
X
X X
X X
Bit
Name
31:8
7
6:4
3
TUR
2
1
0
Intel® PXA255 Processor Developer's Manual
Table
12-17, contains 4 bits that are used to operate endpoint(x), an
reserved
X X
X X
X
X X
reserved
Transmit short packet (read/write 1 to set).
TSP
1 = Short packet ready for transmission.
reserved
Transmit FIFO underrun (read/write 1 to clear)
1 = Transmit FIFO experienced an underrun.
Flush Tx FIFO (always read 0/ write a 1 to set)
FTF
1 = 1 – Flush Contents of TX FIFO
Transmit packet complete (read/write 1 to clear).
TPC
0 = Error/status bits invalid.
1 = Transmit packet has been sent and error/status bits are valid.
Transmit FIFO service (read-only).
TFS
0 = Transmit FIFO has no room for new data
1 = Transmit FIFO has room for at least 1 complete data packet
UDCCS3
UDCCS8
UDCC13
X X
X X
X
X X
X X
Description
USB Device Controller
USB Device Controller
8
7
6
5
4
3
2
1
reserved
X
0
0
0
0
0
0
0
12-31
0
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents