Removing Engines From An Ha Cluster - Brocade Communications Systems Brocade 8/12c User Manual

FIGURE 221
NOTE
If you are creating a new HA cluster, a dialog box displays requesting a name for the new HA cluster.
HA Cluster names can have up to 31 characters. Letters, digits, and underscores are allowed.

Removing engines from an HA cluster

Removing the last engine from an HA cluster also removes the HA cluster.
If only one engine is removed from a two-engine cluster, you must either add another engine to the
cluster, or remove the other engine.
1. Select Configure > Encryption from the menu task bar.
2. Select an encryption group from the Encryption Center Devices table, then select Group > HA
3. Select an engine from the High Availability Clusters table, then click the left arrow button.
4. Either remove the second engine or add a replacement second engine, making sure all HA
5. Click OK.
Brocade Network Advisor SAN User Manual
53-1002167-01
Encryption Group Properties dialog box - HA Clusters tab
The Encryption Center dialog box displays
Cluster from the menu task bar, or right-click an encryption group and select HA Cluster.
The Encryption Group Properties dialog box displays, with the HA Clusters tab selected.
(Refer to Figure 221.)
clusters have exactly two engines.
Creating high availability (HA) clusters
(Figure 153).
18
511