Brocade Communications Systems Brocade 8/12c User Manual page 1013

TABLE 53
SAN privileges and application behavior
Privilege Description
SAN - Discovery Setup Allows you to configure
discovery setup.
SAN - Element Manager - An Element Manager
Product Maintenance privilege that enables
maintenance functions.
NOTE
This privilege affects
M-EOS and M-EOSn
switch product Element
Managers.
SAN - Fabric Binding Allows you to configure
fabric binding.
SAN - Element Manager - An Element Manager
Product Operation
privilege that enables
operator functions.
NOTE
This privilege affects
M-EOS and M-EOSn
switch product Element
Managers.
SAN - Fabric Tracking Allows you to define the
current devices and
connections present in a
fabric as a baseline and
to highlight any changes
to that baseline.
SAN - FCIP Management Allows you to configure
FCIP tunnels and
troubleshooting of IP
interfaces (IP
performance, IP ping and
IP trace route).
Brocade Network Advisor SAN User Manual
53-1002167-01
No Privilege Read-Only
Disables Setup on the Enables Setup on the
Discover menu and Discover menu and
toolbar. toolbar.
Allows you to open the
Discover Setup dialog
box; however, disables all
functions.
Disables the functions Same as No Privilege.
described in the Element
Manager User Manual for
which you do not have
rights.
Displays the message,
"You do not have rights to
perform this action."
Disables the Fabric Enables the Fabric
Binding command. Binding command;
however, disables
funtions on the dialog
box.
Disables the functions Displays the message,
described in the Element "You do not have rights to
Manager User Manual for perform this action."
which you do not have Same as No Privilege.
rights.
Disables the Track Fabric Same as no privilege.
Changes and Accept
Changes commands on
the Monitor menu and
right-click menus of
Fabrics.
Disables the Configure > Enables the Configure >
FCIP Tunnel and FCIP Tunnel and
Configure > IP Configure > IP
Troubleshooting Troubleshooting
commands. Disables the commands.
FCIP Tunnel command on
Only enables the Cancel
the Fabric right-click
function for the dialog box
menu.
boxes.
About user privileges
Read/Write
Enables Setup on the
Discover menu and
toolbar.
Enables all functions in
the Discover Setup dialog
box.
Enables the functions
described in the Element
Manager User Manual.
Enables the Fabric
Binding command and all
funtions on the dialog
box.
Enables the functions
described in the Element
Manager User Manual.
Enables the Track Fabric
Changes and Accept
Changes commands on
the Monitor menu and
right-click menus of
Fabrics.
Enables the Configure >
FCIP Tunnel and
Configure > IP
Troubleshooting
commands.
Enables all commands
and functions on the
associated dialog box
boxes. Also enables all
commands on the FCIP
Tunnels tab in the
device's Properties dialog
box.
C
969