Brocade Communications Systems Brocade 8/12c User Manual page 1011

TABLE 52
Application privileges and behavior (Continued)
Privilege Description
Server Software Allows you to configure
Configuration some of the properties of
the client and server of
the management
application.
Setup Tools Allows you to define and
place commands on
product icons and in the
Tools menu.
Technical Support Data Allows you to capture
Collection support data from Fabric
OS switches.
Brocade Network Advisor SAN User Manual
53-1002167-01
No Privilege Read-Only
Disables the Software Enables the Software
Configuration Parameters Configuration Parameters
folder and subpages in folder and subpages in
the Options dialog box. the Options dialog box;
The configuration cannot however, disables the OK
be viewed. and Apply buttons when
any of the subpages are
selected.
Disables the Setup Tools Enables the Setup Tools
command on the Tools command on the Tools
menu. Any existing Tools menu; however, disables
and/or right-click the OK button.
commands already
defined or defined by
others are available for
use; however, you cannot
configure new items.
If this privilege is removed
and the Event
Management privilege is
assigned then this
message appears:
<title: <Product>
Message>
<Warning>Removing the
Log Management
privilege does not remove
users' ability for Setup
Tools in Event
Management. You might
also want to consider
removing the Event
Management privilege as
well.
Disables the Enables the View
SupportSave, Upload Repository command
Failure Data Capture, and from the Monitor >
View Repository Technical Support menu
commands from the and right-click menu.
Monitor > Technical Disables the SupportSave
Support menu and and Upload Failure Data
right-click menu. Capture commands from
the Monitor > Technical
Support menu and
right-click menu.
About user privileges
Read/Write
Enables the Software
Configuration Parameters
folder and subpages in
the Options dialog box.
Enables all functions
when any of those
subpages are selected.
Enables the Setup Tools
command on the Tools
menu.
Enables all functions in
the Setup Tools dialog
box.
Enables the SupportSave,
Upload Failure Data
Capture, and View
Repository commands
from the Monitor >
Technical Support menu
and right-click menu.
Enables all functions on
the dialog box boxes.
C
967