Displaying The Relay Host Configuration; Removing The Relay Host Configuration; Notification Configuration; Configuring Alarm Notifications - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

5

Notification configuration

4. Enter the Domain Name (example: Brocade.com).

Displaying the relay host configuration

1. Enter 6 in the fwMailCfg menu to display the relay host configuration menu.
2. Enter 1 to display the configuration.

Removing the relay host configuration

1. Enter 6 in the fwMailCfg menu to display the relay host configuration menu.
2. Enter 3 to remove the configuration.
Notification configuration
Notifications act as a signal or alert that notifies you when a threshold has been crossed.
When you use alarm notifications, error messages are sent to designated locations such as an
error log, SNMP trap view, or e-mail. With an error log, you can log in to a particular switch to view
the error messages that have been captured for that particular switch. You can parse the log file to
make error message searches quicker and easier.

Configuring alarm notifications

1. Ensure that notifications appear in the error log by using the following command.
34
The following message displays:
Setting 192.168.39.118 as Relay Host..
1 Display Relay Host configuration
2 Set Relay Host IP
3 Remove Relay Host configuration
4 Quit
1 Display Relay Host configuration
2 Set Relay Host IP
3 Remove Relay Host configuration
4 Quit
switch:admin> fwAlarmsFilterSet 1
The 1 option turns on the alarm notification.
Fabric Watch Administrator's Guide
53-1002752-01