Replacing An Encryption Engine In An Encryption Group - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

Replacing an encryption engine in an encryption group

To replace an encryption engine in an encryption group with another encryption engine within the
same DEK Cluster, complete the following steps:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select an encryption engine from the Encryption Center Devices table, then select Engine >
FIGURE 32
3. Select the engine to replace from the Engine list.
4. Select the engine to use as the replacement from the Replacement list, then click Replace.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
dialog box. (Refer to Figure 1
Replace from the menu task bar.
The Encryption Group Properties dialog box displays with the Engine Operations tab selected
(Figure 32).
You can also display the Engine Operations tab by selecting an encryption group from the
Encryption Center Devices table, selecting Group > Properties from the menu task bar, then
selecting the Engine Operations tab.
Engine Operations tab
All containers hosted by the current engine (Engine list) are replaced by the new engine
(Replacement list).

Replacing an encryption engine in an encryption group

on page 14.)
2
55