Enable Rip Export Cost - Extreme Networks ExtremeWare Command Reference Manual

enable rip export cost

enable rip export [direct | isis | isis-level-1 | isis-level-1-external |
isis-level-2 | isis-level-2-external | ospf | ospf-extern1 | ospf-extern2 |
ospf-inter | ospf-intra | static | vip] cost <number> {tag <number>}
Description
Enables RIP to redistribute routes from other routing functions.
Syntax Description
static
direct
isis
isis-level-1
isis-level-1-external
isis-level-2
isis-level-2-external
ospf
ospf-intra
ospf-inter
ospf-extern1
ospf-extern2
vip
cost <number>t
tag <number>
Default
Disabled.
Usage Guidelines
This command enables the exporting of static, direct, IS-IS, and OSPF-learned routes into the RIP
domain. You can choose which types of OSPF or IS-IS routes are injected, or you can simply choose
or
ospf isis
The cost metric is inserted for all RIP-learned, static, and direct routes injected into OSPF. If the cost
metric is set to 0, the cost is inserted from the route. The tag value is used only by special routing
applications. Use 0 if you do not have specific requirements for using a tag.
Example
The following command enables RIP to redistribute routes from all OSPF routes:
enable rip export ospf cost 0
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies static routes.
Specifies interface routes (only interfaces that have IP forwarding enabled are
exported).
Specifies IS-IS routes.
Specifies IS-IS level 1 routes.
Specifies IS-IS level 1 external routes.
Specifies IS-IS level 2 routes.
Specifies IS-IS level 2 external routes.
Specifies all OSPF routes.
Specifies OSPF-intra area routes.
Specifies OSPF-inter area routes.
Specifies OSPF external route type 1.
Specifies OSPF external route type 2.
Specifies VIP routes.
Specifies the cost metric, from 0-15. If set to 0, RIP uses the route metric
obtained from the route origin.
Specifies a tag number.
, which will inject all learned OSPF or IS-IS routes regardless of type.
enable rip export cost
1005