Part Code 9610 - HP StorageWorks P9000 Manual

Remote web console messages
Hide thumbs Also See for StorageWorks P9000:
Table of Contents

Advertisement

Table 85 Error codes (part code 9605) (continued)
Part
Error
Code
Number
9605
58438
9605
58442
9605
58448
9605
58450
9605
68002
9605
75015

Part code 9610

Table 86 Error codes (part code 9610)
Part
Error
Code
Number
9610
7060
9610
7442
9610
81 12
9610
9107
9610
9362
9610
9363
Error Message
This logical volume is configured as a
command device.
The emulation type of the logical volume
is not OPEN-V.
The specified logical volume is blocked,
or the LDEV is being formatted or
shredded.
An error occurred during SVP
processing.
This logical volume cannot be selected
because it is used as a volume for System
Disk.
The setting cannot be changed because
there is no access right for a resource
group of the specified LDEV.
Error Message
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
There is an invalid value in the Data
Retention information.
There is no valid volume.
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
Do you want to change the expiration
lock mode?
The specified retention term exceeds the
maximum.
Recommended Action
Check the logical volume configuration,
then retry the operation.
Select a logical volume whose emulation
type is OPEN-V.
Retry the operation after the logical
volume has recovered from the blocked
status or after the LDEV has been
formatted or shredded.
If this problem persists, please contact
HP Technical Support.
Check the logical volume configuration,
then retry the operation.
Allocate a resource group of the LDEV.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Mount volumes, then retry the operation.
To continue processing, click [OK]. To
stop processing, click [Cancel].
To change the mode, click [OK].
Otherwise, click [Cancel].
Correct the retention term, then retry the
operation.
Severity
Level
W
W
W
E
W
W
Severity
Level
E
W
W
W
i
W
Part code 9610 305

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp p9500Storageworks p9500

Table of Contents