Part Code 9210; Part Code 9605 - HP StorageWorks P9000 Manual

Part code 9210

Table 84 Error codes (part code 9210)
Part Error
Code Number
9210 7060
9210 7442
9210 7443
9210 81 12
9210 9107

Part code 9605

Table 85 Error codes (part code 9605)
Part Error
Code Number
9605 5013
9605 5030
9605 5041
9605 551 1
9605 5809
9605 6012
9605 6023
9605 6038
9605 6502
9605 6533
9605 6537
9605 7060
9605 71 1 1
302 Message (part code group 9nnn)
Error Message
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
There is an invalid value in the Volume
Retention information.
The VTOC information contains one or
more invalid values.
There is no valid volume.
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
Error Message
An error occurred during SVP
processing.
No commands are issued.
The number of issued commands exceeds
the maximum.
The program product is not installed.
The number of requests for combining
LUs does not match the number of the
LUs.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The mistake is found in the set
parameter.
Processing in progress. Please wait for
a while, and then retry the operation.
An error occurred during SVP
processing.
The setting process has not been
executed because there is no error in this
setting, but an error in the other settings.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Mount volumes, then retry the operation.
To continue processing, click [OK]. To
stop processing, click [Cancel].
Recommended Action
If this problem persists, please contact
HP Technical Support.
Issue a command again.
Decrease the number of commands.
Install Program Product.
Review LUs, and retry the operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Wait a few minutes, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
Check the error factor in the other
settings.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Severity
Level
E
W
W
W
W
Severity
Level
E
W
W
W
W
E
E
E
W
E
W
E
E