Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
Examples
The following command adds the CM certificate with the MAC address of 00C0.8345.de51 to the hotlist,
so that this particular CM cannot register with the CMTS:
Router# config t
Router(config)# cable privacy hotlist cm 00C08345de51
Router(config)#
The following example adds a manufacturer CA certificate into the BPI+ hotlist, so that the CMTS will
reject any CM attempting to register with a certificate from that particular manufacturer:
Router# config t
Router(config)# cable privacy hotlist manufacturer
3435414631413439383335453731423733333643
Router(config)#
Related Commands
Command
cable privacy
cable privacy add-
certificate
cable privacy kek
cable privacy tek
option
show cable privacy
debug cable privacy
OL-1581-08
Description
Enables and configures BPI+ encryption on a cable interface.
Adds CM certificates for BPI+ encryption.
Sets key encryption keys and timeout periods.
Sets traffic encryption keys and timeout periods.
Determines whether a specific CM is online.
Displays information about BPI status and operation.
Displays debug messages for BPI operation.
Cisco Broadband Cable Command Reference Guide
cable privacy hotlist
2-187
Advertisement
Table of Contents
