Table of Contents
Advertisement
cable primary-sflow-qos11 keep
cable primary-sflow-qos11 keep
To preserve the traffic counters for primary service flows after a CM that was provisioned for
DOCSIS 1.1 quality of service (QoS) goes offline, use the cable primary-sflow-qos11 keep command
in global configuration mode. To return to the default configuration and reset the counters to zero when
a DOCSIS 1.1-provisioned CM goes offline, use the no form of this command.
Syntax Description
all
snmp-only
Defaults
Primary service flow traffic counters are not preserved after a DOCSIS 1.1-provisioned CM goes offline
(no cable primary-sflow-qos11 keep). Service-flow information is always preserved for
DOCSIS 1.0-provisioned CMs, regardless of the configuration of this command.
Command Modes
Global configuration
Command History
Release
12.2(15)CX,
12.2(15)BC2
Usage Guidelines
By default, when a CM that is provisioned for DOCSIS 1.1 quality of service (QoS) service flows goes
offline, the CMTS deletes all service flow information, including traffic counters, that correspond to that
CM. The cable primary-sflow-qos11 keep command preserves the service flow traffic counters after a
DOCSIS 1.1-provisioned CM goes offline and then comes back online. This allows service providers to
track the total usage of CMs over a period of time, regardless of the number of times the CMs go offline
and reboot.
This command affects only CMs that are provisioned for DOCSIS 1.1 operations and that are currently
Note
online all cable interfaces on the Cisco CMTS. Information is not preserved for DOCSIS 1.1-
provisioned CMs that went offline before this command was given. The service-flow information for
CMs that are provisioned for DOCSIS 1.0 operations is always preserved, regardless of how this
command is configured.
Cisco Broadband Cable Command Reference Guide
2-180
cable primary-sflow-qos11 keep {all | snmp-only}
no cable primary-sflow-qos11 keep
Modification
This command was introduced.
Preserves all primary service flow traffic counters when a
DOCSIS 1.1-provisioned CM goes offline. This includes the counters
displayed by CLI commands and counters that are obtained through
SNMP requests.
Preserves only the primary service flow traffic counters that are
obtained through SNMP requests. The counters displayed by CLI
commands are reset to zero when a DOCSIS 1.1-provisioned CM
goes offline.
Chapter 2
Cisco CMTS Configuration Commands
OL-1581-08
Advertisement
Table of Contents
