Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
Examples
The following example shows the inactivity timer being set to 20 seconds:
Router(config)# cable service flow inactivity-threshold 20
Router(config)#
The following command disables the inactivity timer, so that the service flow remains UGS, even during
periods of inactivity:
Router(config)# no cable service flow inactivity-threshold
Router(config)#
Related Commands
Command
cable service class
cable service-flow
inactivity-timeout
show controllers cable
OL-1581-08
Description
Sets the DOCSIS 1.1 service class parameters.
Sets the amount of time a dynamic service-flow can be present in the system
without any activity (DOCSIS 1.0 operation).
Displays information for the cable interface.
Cisco Broadband Cable Command Reference Guide
cable service flow inactivity-threshold
2-211
Advertisement
Table of Contents
