Gracefully Deactivating Subscriber Service Sessions; Forcing Immediate Deactivation Of Subscriber Service Sessions - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide

Gracefully Deactivating Subscriber Service Sessions

Use the following commands to gracefully deactivate subscriber's services you can
deactivate a specific service for a subscriber, or you can delete a subscriber session,
which deactivates all of the subscriber's service sessions. We recommend you use
this command to deactivate subscriber service sessions.
no service-management owner-session
no service-management subscriber-session service-session

Forcing Immediate Deactivation of Subscriber Service Sessions

Use the following command to force the immediate deactivation of the specified
subscriber session doing this deletes all active service sessions for the subscriber.
678
Using the CLI to Manage Subscriber Service Sessions
Use to gracefully deactivate service sessions for a subscriber based on owner
information.
Specify the owner name and owner ID of the service session you want to
deactivate.
Use the no version with the service-session keyword to deactivate the specified
service session.
Use the no version without the service-session keyword to delete the subscriber's
session and deactivate all of the subscriber's service sessions.
Example
host1(config)#no service-management owner-session aaa 426777
service-session "video(4500000, 192.168.10.3)"
This is the no version of the service-management owner-session command.
See service-management owner-session
Use to gracefully deactivate service sessions for a subscriber.
Use the subscriber's username and interface, not the subscriber session ID, for
graceful deactivation.
Use the no version without the service-session keyword to delete the subscriber's
session and deactivate all of the subscriber's service sessions.
Use the no version with the service-session keyword to deactivate the specified
service session.
Example
host1(config)#no service-management subscriber-session client1@isp1.com
interface atm 4/0.1 service-session "tiered(1000000, 2000000)"
This is the no version of the service-management subscriber-session command.
See service-management subscriber-session service-session