Monitoring The Status Of All Bgp Neighbors - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring the Status of All BGP Neighbors

Purpose
Action
200
Table 46: show ip bgp regexp Output Fields (continued)
Field Name
MED
CalPrf
Weight
AS path
Monitoring BGP Routes with Matching AS-Paths and Regular Expressions for Single
Regular Expressions on page 196
show bgp ipv6 regexp
show ip bgp regexp
Display summarized status of all BGP neighbors.
The show ip bgp summary and show bgp ipv6 summary commands display similar
information.
To display summarized status of all BGP neighbors:
host1#show bgp ipv6 summary
Local router ID 10.13.13.13, local AS 400
Administrative state is Start
BGP Operational state is Up
Shutdown in overload state is disabled
Default local preference is 100
IGP synchronization is disabled
Default originate is disabled
Always compare MED is disabled
Compare MED within confederation is disabled
Advertise inactive routes is disabled
Advertise best external route to internal peers is disabled
Enforce first AS is disabled
Missing MED as worst is disabled
Route flap dampening is disabled
Maximum number of equal-cost EBGP paths is 2
Maximum number of equal-cost IBGP paths is 2
Log neighbor changes is disabled
Fast External Fallover is disabled
No maximum received AS-path length
BGP administrative distances are 20 (ext), 200 (int), and 200 (local)
Client-to-client reflection is enabled
Cluster ID is 10.13.13.13
Route-target filter is enabled
Default IPv4-unicast is enabled
Redistribution of iBGP routes is disabled
Graceful restart is globally disabled
Global graceful-restart restart time is 120 seconds
Field Description
Multiexit discriminator for the route
Calculated preference for the route
Weight of the route
Autonomous system path
Copyright © 2010, Juniper Networks, Inc.