Monitoring Operational Status Within The Current Vr Context - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide
Related Topics

Monitoring Operational Status within the Current VR Context

Display dial-out state machine operational status and statistics within the current VR
Purpose
context.
This command displays aspects of the dial-out state machine and details about the
dial-out routes themselves. This section presents sample output. The actual output
on your router may differ significantly.
To display dial-out state machine operational status and statistics within the current
Action
VR context:
host1#show l2tp dial-out virtual-router
Dial-out Virtual Router Configuration and Operational Status
Virtual router host1:
Virtual router operational status: inService
Maximum trigger buffers per session: 0
To display aggregate counts for dial-out state machines in each of the possible
operational and administrative states:
host1:dialout#show l2tp dial-out virtual-router summary
To display detailed configuration, state, and statistics:
host1:dialout#show l2tp dial-out virtual-router detail
To display information about the operational or administrative state:
host1:dialout#show l2tp dial-out virtual-router state down
To displays dial-out information across all virtual routers:
host1:dialout#show l2tp dial-out virtual-router allVirtualRouters
NOTE: The level of a user's permission determines the use of the allVirtualRouters
option. For example, if you have permission to view only the current virtual router,
then that is all that is displayed when you enter a command.
Table 97 on page 457 lists the show l2tp dial-out virtual-router command output
Meaning
fields.
456
Monitoring Operational Status within the Current VR Context
For detailed information about operational states, see Dial-Out Operational States
on page 413
show l2tp dial-out target