Table of Contents
Advertisement
CHAPTER 1
Configuring ATM
Overview
Copyright © 2010, Juniper Networks, Inc.
This chapter introduces basic Asynchronous Transfer Mode (ATM) concepts, describes
features of the ATM interfaces, and provides information for configuring ATM on E Series
routers.
This chapter contains the following sections:
Overview on page 3
Platform Considerations on page 10
References on page 11
Supported Features on page 11
ATM NBMA on page 13
Operations, Administration, and Management of ATM Interfaces on page 14
Before You Configure ATM on page 20
Configuration Tasks on page 20
Creating a Basic Configuration on page 20
Setting Optional Parameters on page 23
Configuring OAM on page 31
Configuring an NBMA Interface on page 37
Creating an NBMA Static Map on page 38
Assigning Descriptions to Interfaces on page 40
Sending Interface Descriptions to AAA on page 41
Configuring Individual ATM PVC Parameters on page 43
Configuring ATM VC Classes on page 52
Configuring Dynamic ATM 1483 Subinterfaces on page 66
Monitoring ATM on page 66
ATM is a high-speed networking technology that handles data in fixed-size units called
cells. It enables high-speed communication between edge routers and core routers in
an ATM network.
3
Advertisement
Chapters
Table of Contents
Troubleshooting
