Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 530

JunosE 11.2.x Link Layer Configuration Guide
498
Statistics—Displays statistics information for the specified port
In Octets—Number of octets received on this interface
In Frames—Number of frames received on this interface
In Discards—Number of incoming packets discarded on this interface
In Errors—Number of incoming errors received on this interface
Out Octets—Number of octets transmitted on this interface
Out Frames—Number of frames transmitted on this interface
Out Discards—Number of outgoing packets discarded on this interface
Out Errors—Number of outgoing errors on this interface
queue—Hardware packet queue associated with the specified traffic class and
interface
Queue length—Length of the queue, in bytes
Forwarded packets, Bytes—Number of packets and bytes forwarded on this queue
Dropped committed packets, Bytes—Number of committed packets and bytes
that were dropped
Dropped conformed packets, Bytes—Number of conformed packets and bytes
that were dropped
Dropped exceeded packets, Bytes—Number of exceeded packets and bytes that
were dropped
Using the brief keyword displays the following fields:
Interface—Interface type and specifier associated with the port (for example,
FastEthernet9/1.1)
Port—Bridge group port number on which this interface resides
Status—Operational status of the physical interface: Up, Down, LowerLayerDown,
NotPresent
Example 1—Displays information about a specified interface
host1#show bridge interface fastEthernet 9/1.1
fastEthernet9/1.1
BridgeGroup: 1
Port Number: 1
Operational Status: Up
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: atmfe1
Statistics:
In Octets:
In Frames:
0
0
Copyright © 2010, Juniper Networks, Inc.