Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 494

JunosE 11.2.x Link Layer Configuration Guide
show ip mac-validate interface
show vlan subinterface
462
ATM 5/1.2
2 bridge1483 interfaces found
Example 2—Displays full status and configuration information for the specified
bridge1483 interface
host1#show bridge1483 interface atm 12/0.1
Interface
------------------------- ---------- -------------- ------- ----------
ATM 12/0.1
In: Bytes 0, Packets 0
Multicast 0, Broadcast 0
Errors 0, Discards 0
Out: Bytes 0, Packets 0
Multicast 0, Broadcast 0
Errors 0, Discards 0
ARP Statistics:
In: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Out: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Example 3—Displays only brief summary information
host1#show bridge1483 interface summary
Total bridge1483 interfaces: 3
See show bridge1483 interface.
Use to display the status of the MAC address validation on the physical interface.
Field descriptions
interfaceSpecifier—Interface type slot/port
Keyword assigned to interface—Strict or Loose
Address—IP address of the entry
Hardware Addr—Physical (MAC) address of the entry
Example
host1:vr1#show ip mac-validate interface atm 8/0.1
ATM8/0.1: Strict
Address
180.1.0.2
See show ip mac-validate interface.
Up ----.----.---- Static
Status MAC Address
Up ----.----.---- Static
Hardware Addr
0000.1111.2222
Copyright © 2010, Juniper Networks, Inc.
8192/9188
Oper/Admin
Type MTU
1522/1522