show pppoe interface lockout-time
Copyright © 2010, Juniper Networks, Inc.
See show pppoe interface.
Use to display detailed information about the current encapsulation type lockout
condition for each PPPoE client associated with a dynamic PPPoE subinterface column
on a static PPPoE major interface.
Field descriptions
PPPoE interface—Specifier for the PPPoE interface
Lockout Configuration (seconds)—Encapsulation type lockout settings for the PPPoE
client associated with the dynamic PPPoE subinterface column
Min—Minimum lockout time, in seconds
Max—Maximum lockout time, in seconds
Total clients in active lockouts—Number of PPPoE clients currently undergoing
dynamic encapsulation type lockout
Total clients in lockout grace period—Number of PPPoE clients currently in a
lockout grace period; for more information about the lockout grace period, see
"Guidelines for Configuring Encapsulation Type Lockout for PPPoE sessions" on
page 523
Client Address—Source MAC address of the PPPoE client
NOTE: Because PPPoE sessions that contain the IWF-Session DSL Forum VSA (26-154)
use the same source MAC address of the DSLAM for all subscriber connections, multiple
entries are displayed in the Client Address field for the same MAC address if multiple
IWF sessions contain the same MAC address.
Current—Current lockout time, in seconds; displays 0 (zero) if the PPPoE client is
not undergoing lockout
Elapsed—Time elapsed into the lockout time, in seconds; displays 0 (zero) if the
PPPoE client is not undergoing lockout
Next—Lockout time that the router uses for the next lockout event, in seconds
Example
host1#show pppoe interface atm 12/1/1.1.1 lockout-time
PPPoE interface atm 12/1/1.1
Lockout Configuration (seconds): Min 90, Max 120
Total clients in active lockout: 1
Total clients in lockout grace period: 0
Client Address Current Elapsed Next
-------------- ------- ------- ----
0090.1a42.527c
0090.1a42.527c
Chapter 17: Configuring Dynamic Interfaces
120
30
120
0
0
90
603
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 and is the answer not in the manual?
Questions and answers