Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 735

show vlan subinterface
Copyright © 2010, Juniper Networks, Inc.
Vlan Id—VLAN ID for the interface
Assigned Profile—Overriding profile to be assigned to the VLAN
Status—Operational status of the overriding profile assignment: Active or Inactive.
Active indicates that the router uses the overriding profile to create dynamic interface
columns because no static VLAN subinterfaces exist on this interface. Inactive
indicates that the router does not use the overriding profile to create dynamic
interface columns because a static VLAN subinterface exists on this interface.
Example
host1#show vlan profile override
Profile override(s):
Bulk
Config Svlan Vlan Assigned
Interface Name
---------------- ------ ----- ---- --------- ------
FastEthernet 4/6 vlanB2
% 1 profile override(s) found
See show vlan profile.
Use to display configuration and status information for a specified VLAN subinterface
or for all VLAN subinterfaces configured on the router.
Use the summary keyword to display only the counts of all VLAN subinterfaces and
VLAN major interfaces configured on the router.
Use the vlan or svlan keywords to display information about specific VLAN IDs or
S-VLAN IDs.
Use the agent-circuit-identifier keyword to display information about VLAN
subinterfaces that are created based on the agent-circuit-id information in the option
82 field of DHCP messages or in the DSL Forum VSA 26-1 of PPPoE PADR and PADI
packets. Using this keyword causes the router to display the agent-circuit-identifier
string in the command output.
Field descriptions
Interface—Type and specifier of the VLAN subinterface
Status—Status of the VLAN subinterface: up, down, dormant, lowerLayerDown,
absent
MTU—Maximum allowable size (in bytes) of the MTU for the VLAN subinterface
Svlan Id—S-VLAN ID value, if configured
Vlan Id—VLAN ID value for the VLAN subinterface
Ethertype—S-VLAN Ethertype value, if configured
Chapter 18: Configuring Dynamic Interfaces Using Bulk Configuration
Id Id Profile
---- 2 ipProfile Active
Status
703